PHC 95
Download:
[PDF] Spare Parts PHC 95114 KB
Description
The PHC 95 plasma hand cutting torch impresses with its uncomplicated design, which comprises just three wearing parts. This design not only ensures easy handling, but also makes maintenance considerably easier.
The use of compressed air or nitrogen as cutting gas results in comparatively low gas costs. Particularly noteworthy are the high cutting speeds of this torch, which enable precise and distortion-free cutting even with thin sheets. The application range of the PHC 95 extends from 0.5 mm to 25 mm material thickness. It is started by a safe auxiliary arc ignition. The direct water cooling of the electrode and the indirect water cooling of the cutting nozzle ensure a long service life of the wear parts.
Highlights
- Safe ignition by means of pilot arc
- High cutting speed
- Distortion-free cutting
- Simple operation
- Long electrode service life due to water cooling
- Indirect cooling of the cutting nozzle
Technical Data
| Electrode cooling: | direct water-cooled |
| Nozzle cooling: | indirect water-cooled |
| Max. thickness: | 25 mm |
| Max. capacity: | 95 A |
| Duty cycle: | 100 % |
| Plasma gas: | air or nitrogen |
| Application: | car repair Metallworking shop Climate and ventilation manufacture Switch gear construction Scrapping a.s.o. |
| Spare Parts: | 753.03715 Electrode 753.03753 Nozzle 1.0 753.03754 Nozzle 1.2 753.03776 Nozzle Cap cpl. 753.03751 Nozzle Cap 753.03777 Spacer a.s.o. |