Plasma cutting torches

 

  PHC 60-1
Handy 60A-plasma cutting torch using compressed air or nitrogen as cutting gas. This means putting required low gas costs. Easy handling by on the workpiece. Therefore only a narrow kerf width. Pilot arc is not necessary. Direct water-cooled electrode for essential longer life time of electrode.
  PMC 60
as above PHC 60-1, however as machine-version.
  PHC 95
Sturdy 90A-plasma cutting torch using compressed air or nitrogen as cutting gas. This entails low gas costs. Safety pilot arc ignition. Direct water-cooled electrode and further indirect water-cooled nozzle for essential longer life time of electrode and nozzle. High cutting speed for distortion-free cuttings also of thin sheet metals.
  PMC 95
as above PHC 95, however as machine-version.
  PHC 100 / PHC 140-M
Sturdy and high preformance 200A-plasma cutting torch for cutting of all electrically conductive materials. Safety pilot arc ignition. Closed cooling system for essentially longer life time of nozzle and electrode. Because of that there is no outflow of water during the exchange of nozzle and electrode. There is also the possibility to deliver it as a plasma welding torch.
  PHC 140
Sturdy 140A-plasma cutting torch for compressed air or nitrogen as cutting gas. Because of this low gas costs. Safety pilot arc ignition. Direct water-cooled electrode and further indirect water-cooled nozzle for essential longer life time of electrode and nozzle. High cutting speed for distortion-free cuttings also of thin sheet metals.
  PMC 140
as above PHC 140, however as machine-version.
  PMC 250-1/253
High preformance 300A-plasma machine cutting torch with tip electrode for cutting electrically conductive materials from 2mm up to 90mm thickness. Safety pilot arc ignition. Closed cooling system for essentially longer life time of nozzle and electrode. Because of that there is no outflow of water when changing nozzle and electrode.
  PMC 500-2/506
High preformance 600A-plasma machine cutting torch with tip electrode for cutting any electrically conductive materials from 10mm up to 160mm thickness. Safety pilot arc ignition. Closed cooling system for essentially longer life time of nozzle and electrode. This feature prevents outflow of water when changing nozzle and electrode.
  PMC U5-1/U6-1
High preformance 600A-underwater plasma cutting torch with tip electrode for cutting any electrically conductive materials from 2mm up to 100mm thickness. Safety pilot arc ignition down to 100m water depth. Closed cooling system for essentially longer life time of nozzle and electrode. This feature prevents outflow of water when changing nozzle and electrode. The torch-of-choice for dismantling and decommissioning nuclear reactor components under water.
  WIPMC 500/600
High capacity 750A-plasma cutting torch for mechanized cutting of all electrically conductive materials with the water injection plasma cutting. Nozzle and electrode are direct watercooled. High cutting speeds will be caught. The workpiece you cut is located around 70mm under the water surface. Because of this only low emission of dust and noice. Extremely low workpiece distortion.
  PMC 600E
As above, however with integrated magnetic valve on the torch switchable from oxygen to nitrogen process.

BACK